A Guide to the Keydiy KD-MP Soldering-Free Clip

-

In this guide, we’ll walk you through how to use the KD-MP specific soldering-free clip, using the Touareg PCB as an example.

a-guide-to-the-keydiy-kd-mp-soldering-free-clip-1

Step 1: Access the Wiring Diagram

Open the PC-side software and navigate to the MLB interface.

Click on the [Wiring diagram] option to find the corresponding wiring diagram for your target PCB.

a-guide-to-the-keydiy-kd-mp-soldering-free-clip-2

Step 2: Prepare the PCB

According to the wiring diagram, locate and remove the two capacitors marked in the red box.

a-guide-to-the-keydiy-kd-mp-soldering-free-clip-3

Step 3: Attach the Clip

Clip the red pin onto the VCC position (marked by the yellow circle).

Clip the black pin onto the GND position (marked by the black circle).

a-guide-to-the-keydiy-kd-mp-soldering-free-clip-4

a-guide-to-the-keydiy-kd-mp-soldering-free-clip-5

Step 4: Connect the Harness to KD-MP

Plug the wiring harness connector from the clip into the KD-MP device.

a-guide-to-the-keydiy-kd-mp-soldering-free-clip-6

Step 5: Position the PCB and Collect Data

Once the PCB is securely clamped and the harness is connected, place the PCB into the KD-MP induction area.

Turn off any interfering images or displays, then click [Collect Original Key Data] in the software.

Follow the on-screen prompts to complete the operation.

a-guide-to-the-keydiy-kd-mp-soldering-free-clip-7

a-guide-to-the-keydiy-kd-mp-soldering-free-clip-8

Video Guide

For a visual walkthrough, check out our video tutorial:


Final Notes

With the Keydiy KD-MP soldering-free clip, programming keys becomes a straightforward and solder-free process. Always ensure proper connections and follow software instructions carefully for optimal results.


For more tools and accessories, visit:

www.obd2shop.co.uk

Comments

Post a Comment

Popular posts from this blog

JMD Handy Baby II Functions simply introduce

-
Image
Recently,  JMD Handy Baby II key tool for 4D/46/48 Chips just caught a lot of attention. In this post, l want to make a simple introduction for the Functions of it. Handy Baby 2 is Living for the locksmith, saving for the locksmith. It has the following features: handy baby 2 function Menu display 1. RD & CP: Identification chip/Edit Chip data/Deco chip/Copy chip 2. Chip-fun: Generate chip/Chip simulate/Chip transfer 3. Det-menu: Frequency test/ Data test/ signal detect 4. Remote: Remote renew/FIX CODE clone/Fixed code/JMD remote renew (JMD remote by JMD APP) 5. Card-cp: Copy ID/IC card 6. Assistant: Copy Audi/VW 4th / Audi 5th/Audi ID8E/Assistant online(All key lost)/Assistant information 7. More-fun: Functional introduction/Simulate as transponder/ECO Mode 8. 96bits-dec: Deco 96bits 48 and copy 9. Setup: Bluetooth/Voice/Volume/Brightness version/Function list/APP QR code Handy Baby: Living for th...
Read more

How to copy Mazda 8C with JMD Handy Baby 2 + JMD 8C remote?

-
Image
JMD Handy Baby 2 can easily copy Mazda 8C with the help of JMD 8C remote. This article is available with the procedure. Firstly, put the original key into the coil of the JMD Handy Baby 2 to identify. ID8C. Put the JMD 8C remote into the coil. Copy. Success, copy the next key. Do the final step, use the key to turn on the ignition, okay, start it on. Thanks to JMD Handy Baby 2 .
Read more

How-to's of JMD handy baby 2 plus JMD OBD add MQB key

-
Image
Show you how to use JMD handy baby 2 plus JMD OBD to add MQB key on one Golf 7. Prepare: JMD handy baby 2 JMD OBD One original Golf 7 key (Insert it into the ignition and turn on, then you will find it is working) One new key (not work) Procedure:  1. Insert the original key into the ignition and turn on. 2. Plug the JMD OBD into the obd2 diagnostic sort of the Golf 7. 3. Use your mobile phone to find out the JMD APP to download, there is an MQB option. turn on Bluetooth and connected to Handy Baby 2 machine. 4. Tap "Read the Anti-theft data". It will take about 3-5 minutes to read the data, the dashboard will turn on and off during reading the data. When the dashboard is off and we need to wait until it turns on again. 5. Ok, succeed, the file we need to save and we can change the name we want. 6. Save the file and we generate the key. This function needs to connect the Handy Baby II. Please connect the Handy Baby II with OTC cab...
Read more